Esp 32
Using an Arduino as a logic analyzer
Repurposed an Arduino Uno as a multi-channel logic analyzer to capture and inspect digital signals on ports 8 through 11
Spinning a Stepper
Set up a reproducible ESP32 ESP-IDF development environment on NixOS by patching Nix packages and debugging the VSCode Espressif extension from source
Driving steppers with the RMT module
Resolved ESP32 RMT looping artifacts by disabling software transmit interrupts before enabling hardware loop mode, achieving precise square wave generation
Using Nix to write rust on the esp32
Packaged a reproducible Rust cross-compilation toolchain for ESP32 microcontrollers using custom Nix derivations
Using an ESP32 as a logic analyzer
Repurposed an ESP32 as a SUMP-compatible logic analyzer by integrating esp32_sigrok with sigrok and Pulseview for capturing stepper motor timing signals
ESP32 development in NixOS using VSCode
Built reproducible Nix derivations for the ESP-IDF SDK and xtensa-esp32 toolchain on NixOS
Translating an esp32+esp-idf bluetooth example to rust
Implemented ESP32 Bluetooth Low Energy heart rate service in Rust using the NimBLE stack by translating and adapting C reference implementations
Musings on packaging build system via splitting independent libraries
Packaged esp-idf build system into a standalone Rust library to enable reusable ESP32 Bluetooth development
Using a smooth stepper driver on the esp32 in rust
Replaced L298N H-bridge with TMC2208 stepper driver to reduce GPIO overhead, eliminate overheating, and simplify microstepping control